The Curt fifth wheel rail kit part # C16424-204 does not come with the pins that hold a hitch to them, but the hitch you order will have those.
I attached an install video for this rail kit for you to check out as well. view full answer...
Yes, the Timbren Suspension Enhancement System # TFR350SDJ includes two 1/2" spacers. If you need additional spacers, or a larger size, the 1" # A25723-90AH00 and 1/2" # TA25722-90P00 are also available separately. view full answer...
The Scrubblade Heavy Duty Windshield Wiper Blade # SC99FR that fits your 2017 Ford F-350 Super Duty comes in a quantity of one.
So in order to get a set you simply need to change the quantity to "2" in on the product page you when order.
I have added a link to a video review for you to check out as well of the Scrubblade Heavy Duty Windshield Wiper Blade # SC99FR. view full answer...
Yes, you can purchase the Reese M5 5th Wheel Trailer Hitch for Ford Towing Prep Package - Single Jaw - 20,000lbs # RP30921, which will come without the wiring harness. This hitch along with other M5 Series hitch heads require the custom wedge kit # RP44FR when used with a rotating pin box. view full answer...
The RV Bunk Bed Safety Net for Children # OBE94FR comes with the same mounting hardware no matter what it's being installed on.
This comes with 4 sheet metal screws that are #8 x 1.25" and then 8 truss head screws and are #8 x 0.75". The sheet metal screws are for the footman loops and the truss head screws are for the net.
Hope this helps! view full answer...
Thank you for the questions about the Roadmaster Rear Anti-Sway Bar and End Link Kit # RM-1139-173-00 for your 2015 Ford F-350 Super Duty.
I spoke with my contact at Roadmaster who wasn't sure why they don't have specific instructions for the end link kit but he did say that you just connect the links to the sway bar and then lift them up to holes in the frame which allow them to hang straight down.
This kit is comprised of 2 different kits; the sway bar kit # RM-1139-173 and the End... view full answer...
The Lippert Road Armor # LC696740 does not come with the bolts you'll need for installation, so you'll still need the hardware. However, the # LC64FR you're referring to are only 3/8" wet bolts and you'll actually need 9/16" diameter wet bolts. The best solution is going with something like the MORryde Suspension Upgrade Kit for Tandem Axle Trailers # MR46ZR (2-1/4" shackles) # MR76ZR (3-1/8" shackles). These kits come with the bronze bushings, wet bolts and shackle straps. There are some... view full answer...
Part # TLF2022 consists of 2 TorkLift front tie-down inserts, frame brackets, and the necessary mounting hardware. The rear kit only for the 2017 Ford F-350 is part # TLF3008. Both of these are a confirmed fit for the 2017 F-350 with 6-3/4 Foot Bed, without board or step underneath truck bed and with a factory installed hitch. These will not fit trucks with factory flip-out steps that are mounted under the bed. view full answer...
The driver and passenger side floor mats are included with part # WT4410121. These will work great for your 2017 F-350.
These are Black custom floor mats and have channnels that help divert any liquids away from your shoes, clothes, and especially your truck carpeting. I have these in my SUV and they are the best floor mats I have ever owned. view full answer...
The Hide-A-Goose Underbed Gooseneck Trailer Hitch with Custom Installation Kit # 9468-94 comes with safety chain u-bolts, like are shown in the accompanying photo. Those u-bolts do come with the kit and if you take a look at the linked installation instructions you can see how they install. view full answer...
The A-iPower 2,000-Watt Portable Inverter Generator - 1,600 Running Watts - Gas - Manual Start # 289-SUA2000i is gravity fed and does not have a fuel pump. view full answer...
Yes, the Clazzio Front Custom Seat Covers part # AL-EAFOA7259BK which are a fit for your 2019 Ford F-350 comes with all three headrest covers. I confirmed this with Clazzio for you as well. view full answer...
The Curt A20 5th Wheel Hitch # C16140 is also available separately with these parts:
- Replacement Head Unit for Curt A20 5th Wheel Trailer Hitch # C16540
- Replacement Base Legs for Curt Q20 5th Wheel Trailer Hitch # C16904
If it's cheaper to purchase them separately as opposed to kitted together then by all means go that route. The difference is just how our system is currently pricing them and that is always subject to change at any time (just like everything else sold online). view full answer...
The Firestone Ride-Rite # F95FV weigh approximately 30-lbs, which is an extremely negligible weight and overall isn't going to have any significant negative impact on the GVWR of your 2020 Ford F-350.
If you don't already have a compressor system for your truck, they're great additions to allow for instant customization of your ride quality and load leveling ability. I recommend using the Firestone Air Command II - Analog - Heavy Duty Compressor & Air Tank - Dual Function - 150 psi # F2168... view full answer...
Replacement Head Unit for Curt A25 5th Wheel Trailer Hitch - 25,000 lbs Item # C16580 is the head and the center section so you would only need the appropriate legs for your 2017 Ford F-350 long bed with the factory prep package.
The legs are Curt OEM 5th-Wheel Hitch Legs for Ford Super Duty Towing Prep Package - 24,000 lbs Item # C16017. But they are rated for 24,000 pounds.
If you need the higher capacity the only option is Reese M5 Series 5th Wheel Trailer Hitch - Single Jaw - 27,000... view full answer...
The Equal-i-zer Weight Distribution System # EQ64FR does not come with a hitch ball attached. This is due to the manufacturer not installing the hitch ball from the factory. We pair their hitch with the Ball # EQ54FR as a package to ensure the correct size hitch ball goes with the correct weight distribution hitch ball. You will need the 1-7/8" 12pt Thin Walled Socket # ALL643216 to install the hitch ball on the hitch head. It is also needed to verify and check torque while you use the... view full answer...
The Trailer Valet JXC Trailer Jack w/ Footplate and Drill Powered Option part # TV94FR as you mentioned does not come with hardware, most customers just use the hardware from the existing jack. That said, I don't have any exact hardware requirements for this. I recommend just taking a trip to the hardware store and picking up some bolts, nuts, and lock washers which are grade five and fit into the existing holes. view full answer...
Everything is included to mount the Under-Bed Rail and Installation Kit # RP87FR to your 2017 Ford F-350.
The Only additional item you may need is the Inner Frame Brackets for Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Hitch # RP27FR. To determine if you need this kit or not, you will need to verify that your F-350 has the inner frame brackets already installed. If they are not present you will need the # RP27FR. Having these inner frames brackets allow you to... view full answer...
The Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger - 35 Amp # PD4135K requires you to purchase breakers and fuses separately. view full answer...
Good question but the frame-only portion is not available as a separate purchase; you do have to get the entire part, the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF4007. view full answer...